Recently Updated Pages
Install MediaRecorder with the camera drivers
Aim To install the software that allows communication between your camera and the operating syst...
Connect the GigE cameras to the PC
Prerequisite You have followed the entire procedure in Ethernet card setup in Set up IP camera...
Select ONVIF cameras in MediaRecorder
Aim To select a camera that supports ONVIF Profile S in MediaRecorder. If your device does not ...
Create camera settings
Aim To configure the camera for optimal recording with MediaRecorder. Prerequisites You have...
Set camera password and select power line frequency
Aim To give the camera a password, which is compulsory, and to select the power line frequency o...
IP cameras
When do I need an IP camera? IP cameras are connected directly to a network. IP cameras are espe...
Connect IP cameras to the PC
Prerequisite You have followed the entire procedure in Ethernet card setup Procedure The proce...
Set Ethernet card IP address
Aim To set the IP address of the Ethernet card to the same range as the cameras and the computer...
Install the Ethernet card
Aim To place the Ethernet card into the computer with MediaRecorder. Prerequisites You hav...
Ethernet card setup
Aim To insert the 1 Gb Ethernet card into your computer and to configure it to work with MediaRe...
Change video standard
Aim To specify the correct video standard to be used by the Picolo Alert PCIe card. Procedure...
Connect the analog camera to the computer
important By default Windows 10 computers have the option Fast startup enabled. This means that ...
Install the Picolo Alert PCIe card
Aim To install the card that digitizes the output of analog cameras. Prerequisites You use M...
Record at a predefined time
Aim To schedule video recording. This is especially useful when you want to start recording in t...
Save the camera settings
Aim To make a configuration file that can be used to open the correct cameras, microphones and v...
Troubleshooting
If you are having problems, please first read Specifications or Requirements of a custom computer...
Install N-Linx Agent
Aim To install and set up the tool that starts MediaRecorder when you start an observation in Th...
Make sure The Observer XT can access the MediaRecorder video files
(for 2-computer setups) Aim To make sure The Observer XT can access the videos recorded by Medi...
Select an audio device
Aim To select the audio source. Prerequisites Your devices are connected to the computer wit...
Use of the Screen Capture tool
Using the standard Screen Capture tool in MediaRecorder The Screen Capture tool is an add-in to ...