Set up IP cameras
Set up IP cameras
Main topics The steps to install IP cameras Ethernet card setup Camera setup Select ONVIF...
The steps to install IP cameras
Prerequisites The network allows data transfer of at least 1 Gb per second. We recommend to u...
Ethernet card setup
Aim To insert the 1 Gb Ethernet card into your computer and to configure it to work with MediaRe...
Install the Ethernet card
Aim To place the Ethernet card into the computer with MediaRecorder. Prerequisites You hav...
Set Ethernet card IP address
Aim To set the IP address of the Ethernet card to the same range as the cameras and the computer...
Connect IP cameras to the PC
Prerequisite You have followed the entire procedure in Ethernet card setup Procedure The proce...
Camera setup
Aim To configure the cameras for use with MediaRecorder. Prerequisites You have Axis IP came...
Set camera IP address
Aim To set the IP address of the camera to the same range as the Ethernet card and the computer....
Set camera password and select power line frequency
Aim To give the camera a password, which is compulsory, and to select the power line frequency o...
Create camera settings
Aim To configure the camera for optimal recording with MediaRecorder. Prerequisites You have...
Create audio settings
Aim To optimize the recording volume. Prerequisites You have Axis IP cameras that are supp...
Select ONVIF cameras in MediaRecorder
Aim To select a camera that supports ONVIF Profile S in MediaRecorder. If your device does not ...
Adjust advanced video quality options
Aim To change video quality, for example to reduce the video file size. Prerequisite You exper...
Select devices that do not support ONVIF in MediaRecorder
Aim To select a device that does not support ONVIF Profile S in MediaRecorder. If your device d...